Protection against Sparks and Fires
GGE proposes systems, active or passive, capable of reducing the probability that a spark (ignition of the fire) can reach the filter. In the unfortunate event that a fire is generated, GGE is able to offer protection systems that have the purpose of mitigating the effects of this event.
The evaluation of the fire protection system varies according to different parameters. The technical staff of GGE is able to support the customer in choosing and sizing the most suitable system.

- RED CYCLONE : SPARK TRAP
- BERT-TRAP : SPARK TRAP
- ACTIVE SPARK DETECTOR
- WATER PRESSURIZATION UNIT
- GRAVITY FIRE DAMPER
- SPRINKLER CIRCUIT
- THERMOVELOCIMETRIC TEMPERATURE PROBE
- AUTOMATIC AND MANUAL FIREPREVENTION BY-PASS
- ANTI-FIRE CENTRAL

Explosion Protection
It is necessary to take into consideration the possibility that an explosion is generated inside the filter. For this purpose, GGE offers machines and systems equipped with protection systems capable of limiting the damage that this event can cause.
The types of safeties that are most used are of two types:
A) Explosion-proof panel that in the event of an explosion directs the explosion in a predefined direction
B) Non-return valve that decouples the filter from the piping circuit.
There are also very rapid activation explosion suppression systems which, however, usually have higher costs.
- EXPLOSION NON-RETURN VALVE
- VENTING PANEL
- INDOOR VENTING
- SUPPRESSION SYSTEMS